How to connect a Terminal to Linux PC trough cable?
This can only be provided by Microsoft ActiveSync under Windows. We would suggest you try to use networking to do a file exchange.
How to disable WiFi Pop-up message when doing a system reset?
Once the WiFi function is used, it will generate a file which records settings for “Pop-up message”. The file is called “WLANMESSAGE” and you can find it in the path: \My Device\DiskOnChip\Backup\. When you open this file, you will see a number of different settings. “0” means “Do not show message” and “1” means “Show message”.
How to Reset a Terminal?
Warm Reset:
For SC600 SERIES, press "F1" and "F4" buttons simultaneously.
For SC700 SERIES, press "F1" and "F4" buttons simultaneously.
For SC800 SERIES, press "Reset button" (on the back side of Terminal).
Cold Reset:
For SC600 SERIES, press "F1", "F4" and "Power" buttons at once.
For SC700 SERIES, press "F1", "F4" and "Power" buttons at once.
For SC800 SERIES, press "Reset button" and hold “Power” at once.
What you need to do to turn off the pop-up message?
1. Find “WLANMESSAGE” in the path:\My Device\DiskOnChip\Backup\
2. Open the file and change the number from “1” to “0”
3. Reset the device and see if the pop-up message appears when you start up.
Note: If you can’t find "WLANMESSAGE", please cold reset the device. How to install a cab file automatically when a device cold boot?
1- Put the cab file in flash folder - path: \DiskOnChip\Startup\Cold\
2- Select the cab file & modify it’s properties. Set “Attributes” to be “Read-only”
This can only be provided by Microsoft ActiveSync under Windows. We would suggest you try to use networking to do a file exchange.
How to disable WiFi Pop-up message when doing a system reset?
Once the WiFi function is used, it will generate a file which records settings for “Pop-up message”. The file is called “WLANMESSAGE” and you can find it in the path: \My Device\DiskOnChip\Backup\. When you open this file, you will see a number of different settings. “0” means “Do not show message” and “1” means “Show message”.
How to Reset a Terminal?
Warm Reset:
For SC600 SERIES, press "F1" and "F4" buttons simultaneously.
For SC700 SERIES, press "F1" and "F4" buttons simultaneously.
For SC800 SERIES, press "Reset button" (on the back side of Terminal).
Cold Reset:
For SC600 SERIES, press "F1", "F4" and "Power" buttons at once.
For SC700 SERIES, press "F1", "F4" and "Power" buttons at once.
For SC800 SERIES, press "Reset button" and hold “Power” at once.
What you need to do to turn off the pop-up message?
1. Find “WLANMESSAGE” in the path:\My Device\DiskOnChip\Backup\
2. Open the file and change the number from “1” to “0”
3. Reset the device and see if the pop-up message appears when you start up.
Note: If you can’t find "WLANMESSAGE", please cold reset the device. How to install a cab file automatically when a device cold boot?
1- Put the cab file in flash folder - path: \DiskOnChip\Startup\Cold\
2- Select the cab file & modify it’s properties. Set “Attributes” to be “Read-only”
How to Set up Wireless LAN?
SC600/SC700 Series
Press "Start" > "Setting" > "Control Panel" > "WLAN Manager".
Into AP Browser tab, tap Scan Button to renew the network.
Select a network, tap the Join button or double tap it for more options.
Press OK to save all your Wireless LAN settings.
SC800 Series
Press ”Start” > “Setting” > “Control Panel” > “WLAN”
Double tap “WLAN” icon to enable WLAN module
Tap “profile”, click “scan” to renew WLAN AP
Select a WLAN AP or double tap it for more information
Press “OK” to save all your wireless LAN settings
How to check Bluetooth ID?
“Start” > “Setting” > “Control Panel” > “Bluetooth Device Properties”.
How to enable Bluetooth Device?
“Start” > “Setting” > “Control Panel” > “Control Center” > “Information”.
Then you can see the Bluetooth ID in “Information”.
How to Re-calibrate?
“Start” > “Setting” > “control panel” > “Stylus” > “Calibration” > “Recalibrate”
How to Connect a Terminal with a PC?
Windows XP: Active Sync
Windows Vista: Mobile Center
Windows 7: Mobile Center
Please see the User Manual for more details.
- Home
- Solutions
- Development House
- Partners
- Web Applications
- Careers
- Webmail
- Contact Us
Empower Business
© Mobility Eye 2011